409,50 €


455,00 €

In stock

126,90 €


141,00 €

In stock

15,25 €


16,94 €

In stock

32,40 €


36,00 €

In stock

4,50 €


5,00 €

In stock

5,40 €


6,00 €

In stock

2,70 €


3,00 €

In stock

x 3

2,57 €


2,85 €

In stock

28,79 €


31,99 €

Out of stock

4,95 €


5,50 €

In stock

44,10 €


49,00 €

In stock

12,51 €


13,90 €

In stock

707,56 €


786,18 €

Pack content

All grain brew system for making top-notch quality craft beer at home. This baby will impress your friends and family and is big enough to brew 12,5-35 liters of beer in one go.

Brewster Beacon, the new beaming lighthouse for homebrewers

Brewster Beacon, the new beaming lighthouse for homebrewers. Let the new Brewster Beacon lead the way to even better brewing- experiences and results. Brewster Beacon will brighten up your life and give thousands of good moments, as well as thousands of liters of homemade craft beer.

All grain brew system for making top notch quality craft beer at home. This baby will impress your friends and family and is big enough to brew 25-35 liters of beer in one go. Home brewing just got easier and better with the new Brewster Beacon. It will take your home brewing to the next level and from here on you will only look forward and wonder, “why didn’t I do this earlier?”.

Brewster Beacon differentiates itself from competitors and the former Brewster NG, we have taken all our experience and knowledge in construction of the brewing system. This has contributed to the development of the best Brewster so far. In the new Brewster we have taken all the best from Brewster NG and loaded the new version with brilliant details and improvements. 

Key Differences:

  • Mounted visible level gauge for easy and accurate reading of the liquid in the kettle. Useful during mashing and sparging.
  • Stainless steel filter covering almost the entire bottom.
  • The Brewster pumps the wort out in 3 min. No need to wait for the wort to run out by itself.
  • The bottom filter reduces sediment by up to 50%
  • The pump sucks directly from the bottom, through the bottom filter, ensuring no waste of wort.
  • The grain basket can easily be raised in several steps using the removable handle
  • Detailed video guides


The remaining cool facts:

  • Polished stainless steel AISI 304
  • Weight: 10 kg
  • Brew capacity 35 liters, total capacity 40 liters
  • Dimensions: Height and diameter: 57.5 x 36.0 cm
  • Heating element with a capacity of 2500 W, located at the bottom of the kettle, therefore avoiding caramelization
  • The heating element is adjustable from 100 W to 2500 W, in 100 W increments.
  • Temperature range from 25°C to 100°C, adjustable to 0,1°C
  • Temperature control up to 100°C, with +-1°C deviation
  • Integrated circulation with adjustable flow rate made from stainless steel AISI 304
  • Stainless steel AISI 304 grain basket with built-in overflow pipe for boil dry protection
  • The basket can be adjusted in relation to the amount of malt. The basket holds up to 9 kg
  • Clear and easy to read LCD monitor
  • Manual or automatic program control with alarms/reminders
  • Programmable of up to 9 mashing steps and up to 9 hop/spice additions
  • Built-in memory with capacity for saving up to 10 recipes
  • Powerful 230 V magnetic pump with separate on/off button. Capacity 8 L./min.
  • Glass lid ensuring easy visual monitoring of the mashing process
  • All Brewster Beacons are tested before shipping
  • Danish, English and German instruction manual

Data sheet

Volume ml 40 Liter
quantity malt volume 9kg
%MCEPASTEBIN%FermZilla, 35 liter Starter Kit. Incl. Yeast tank in clear PET plastic, stainless steel frame, large Butterfly valve, lid and yeast tube, yeast collector. Withstands pressures up to 2.4 Bar / 35 PSI.
Dawn of a New Age in Home Brewing

FermZilla revolutionary design simplifies the home brewing
process and minimizes the risks of infection and oxidation.
Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer.
You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the
optional pressure kit and the additional pressure release valve with gauge.
<iframe width="560" height="315" src="" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Yeast harvesting container 1.000 ml.

Can be used as a yeast starter and suits Magnetic Stirrer Machine item

With this pressure kit you unlock the FermZilla’s true potential, it turns the FermZilla into a true uni tank, which is a conical fermenter for fermenting, carbonating, and dispensing. This kit fits both the 27 as well as the 55 litre FermZilla. Thanks to this upgrade it is now possible to ferment under pressure at home, just like commercial breweries do. As a result, more heat is retained and less esters and fusel alcohols are released during fermentation.

By fermenting under pressure, the beer is already carbonated and can be served directly using the pressure kit. The pressure relieve valve ensures that the 2.4 bar maximum pressure on the fermentation vessel is not exceeded. Should you still want to keg, then you can easily transfer your beer to a keg without pressure loss.

  • less esters and fusel alcohols in the beer due to fermentation under pressure
  • always draw clear beer with the floating dip tube
  • beer is already carbonated by fermentation under pressure
  • serve directly or transfer to a keg without pressure loss
  • lid (photo 2) not included

Note: The silicone hose of the pressure kit is 80 cm long. For use with the FermZilla 27 l the hose should be shortened to the desired length (approx. 60 cm).

This kit, consisting of an adjustable pressure relief valve with integrated pressure gauge, is ideal for controlling the pressure retained in your pressure vessel. The adjustment wing screw on the side allows you to increase and decrease the exact set pressure. With a Phillips screwdriver you can easily disassemble the BlowTie kit for thorough cleaning.
suits pressure from 0-15 psi (0 to 1 bar)
made from food-grade polyacetal (POM: polyoxymethylene)
stainless steel screws

8 mm (5/16") push on both sides

For cooling 20-30 Liter mash. Can be used for bigger volume.
10L ~ 8min 25L ~ 20min.
These high quality plastic disconnects are the most common homebrewer piece of equipment to attach to ball lock kegs. Our Premium Ball Locks are designed with the highest tolerances and quality control standards. The barbs are made from stainless steel not nicle coated brass like some of the other cheaper disconnects you might see on the market.

Chiller in stainless steel, 8,8 meters

Diameter 25 cm.

Height 37 cm.

Without fittings.

Kit for connection of Snake-type cooler to water-supply tap or shower hose thread 1/2 "
Designed for cooler with 8mm tubes